Bullit
A DOWNHILL BIKE WITH A BUILT-IN CHAIRLIFT
If you feel the pull of gravity riding but want an extra push to get to the top, the Bullit is for you. Specifically designed to excel on the toughest terrain, it features an electric motor to get you to the drop-in of the wildest trails. The Bullit is the closest you can get to owning both a downhill bike and a chairlift.

WHEN GRAVITY CALLS
The Bullit is a no-limits ebike. With DH-derived geometry, huge travel, and rugged components, it's made for the wildest trails that would typically require a downhill bike.

WHAT GOES UP, LOVES COMING DOWN
When you seek out the roughest and most challenging trails, the Bullit will be your trusty sidekick. And when the route there takes you into rarefied air, having the power of a motor means you can save your best for the ride down.
Bullit X0 AXS RSV
Technologie de pointe, équipement très haut de gamme et performances exceptionnelles. Cadre en carbone CC, transmission SRAM T-Type X0 AXS, suspension FOX Float Factory, et roues Reserve HD/DH en carbone montées sur moyeux DT Swiss.
Bullit GX AXS
Des performances d’élite, sans fioritures. Suspension FOX Float Performance Elite avant et arrière, transmission électronique T-Type SRAM GX Eagle AXS, et freins SRAM Maven puissants.
Bullit 90
Composants fiables et performants offrant un excellent rapport qualité-prix : roues Reserve AL, freins SRAM Maven, tige de selle télescopique OneUp, suspension FOX Float Performance et nouvelle transmission à câble SRAM T-Type 90.
Bullit 70
Modèle de base, avec le même moteur Bosch et les mêmes composants de qualité que le reste de la gamme Bullit. Nouvelle transmission à câble SRAM T-Type 70 et suspensions performantes, sans les nombreux réglages externes.
Design Details
Bullit
Tailles et géométries
Si vous vous trouvez entre deux tailles recommandées, l'idéal est bien sûr d'essayer les deux. Mais à défaut, vous pouvez aussi étudier les mesures de reach et de stack de votre vélo actuel pour les comparer au modèle qui vous intéresse et ainsi vous faire une idée des dimensions qui vous conviennent. Si vous n'avez pas la possibilité d'essayer le vélo, voici quelques éléments à considérer.
s | m | l | xl | xxl | |
---|---|---|---|---|---|
Reach (Hi/Lo) | 435/432 | 460/457 | 480/477 | 500/497 | 525/522 |
Stack (Hi/Lo) | 622/625 | 631/635 | 640/643 | 654/656 | 670/674 |
C. Angle de direction (Hi/Lo) | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 |
K. Longueur du tube de direction | 100 | 110 | 120 | 135 | 155 |
G. Longueur des bases | 440 | 443 | 446 | 449 | 452 |
Front Center | 780 | 809 | 834 | 860 | 894 |
H. Hauteur du boitier (Hi/Lo) | 346/342 | 346/342 | 346/342 | 346/342 | 346/342 |
BB Drop Front (Hi/Lo) | 27/31 | 27/31 | 27/31 | 27/31 | 27/31 |
BB Drop Rear (Hi/Lo) | 9/13 | 9/13 | 9/13 | 9/13 | 9/13 |
E. Empattement | 1220 | 1252 | 1280 | 1309 | 1346 |
M. Longueur de tube supérieur | 571 | 596 | 617 | 640 | 670 |
L. Longueur du tube de selle | 380 | 400 | 420 | 460 | 500 |
D. Angle du tube de selle (Hi/Lo) | 78.6/78.3 | 78.7/78.4 | 78.7/78.4 | 78.7/78.4 | 78.6/78.3 |
Standover Height (Hi/Lo) | 745/740 | 739/735 | 738/733 | 738/733 | 735/730 |
Bullit
Configuration et support technique
Que vous soyez l'heureux propriétaire d'un Bullit ou si vous cherchez à connaitre les moindres détails, vous trouverez tout ici.

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | Head Tube Badge | 1 | 20-27756 | Clean frame surface, center on headtube | |
B | M5x10 BHCS | 4 | 26-27915 | Apply Loctite 242 to threads | 9 Nm |
C | Shuttle guard | 1 | 30-27825 | Line up with battery screws | |
D | Bosch DU Performance CX | 1 | 72-25239 | Bosch part number EB11.100.00E | |
E | M4x16 BHCS | 3 | 26-23102 | Apply grease to threads | 0.65 Nm |
F | DU Protector | 1 | 30-27495 | ||
G | M6x10 BHCS | 2 | 26-21224 | Apply loctite 242 to threads | 3 Nm |
H | Bosch DU mount nut | 2 | 26-27862 | Bosch part number EB11.200.03C | |
I | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
J | 36.4 Seat Collar | 1 | 34-20201 | ||
K | M4x26 Bosch Screw | 1 | 26-28150 | ||
L | Bosch TT System Controller | 1 | 72-25240 | Bosch part number EB13.100.000 | |
M | Bosch TT adapter | 1 | 26-27857 | Bosch part number EB13.200.0AE |

label | name | quantity | torque | part_number | blurb |
---|---|---|---|---|---|
A | M5x5 Set Screw | 2 | 0.5 Nm | 26-15532 | Apply Loctite 242 to threads, titghten until flush |
B | Water Bottle Screw | 2 | 26-21360 | ||
C | Pivot Axle M15x91 | 1 | 20 Nm | 08-22343 | Apply Loctite 242 to threads only, apply grease to shaft only |
D | M6 Tapered Washer | 2 | 26-15633 | Apply grease to surface | |
E | M6 Washer | 2 | 26-11817 | ||
F | M6x20 SHCS | 2 | 9 Nm | 26-15947 | Apply Loctite 242 to threads |
G | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
H | M8x45 Lowhead SHCS | 1 | 15.6 Nm | 26-20091 | Apply Loctite 242 to threads |
I | Bosch charge socket holder | 1 | 26-27867 | Bosch part number EB12.120.01A | |
J | Bosch MCx14 Screw | 2 | 26-27869 | Bosch part number F04N.002.663 | |
K | Bosch COB O-ring | 1 | 26-27868 | Bosch part number EB12.120.019 | |
L | Bosch charge socket | 1 | 72-25237 | Bosch part number EB12.120.048 | |
M | Bosch charger port cover | 1 | 26-27866 | Bosch part number EB12.120.01B | |
N | Bosch DU Insert Sleeve | 1 | 26-29334 | Bosch part number EB11.200.0GK | |
O | Bosch DU mount bolt front | 1 | 30 Nm | 26-27864 | Bosch part number EB11.200.12M |
P | Bosch DU mount bolt rear | 1 | 30 Nm | 26-27865 | Bosch part number EB11.200.12H |
Q | Pivot axle M15x80.5 | 1 | 20 Nm | 08-16292 | Apply Loctite 242 to threads only, apply grease to shaft only |
R | M4x8 BHCS | 2 | 0.65 Nm | 26-21249 | Apply grease to threads |
S | Fender | 1 | 30-27475 | ||
T | M10x10 trunnion screw | 2 | 16 Nm | 26-27481 | Apply Loctite 242 to threads only, apply grease to shaft only |
U | 6900-2RS Bearing | 2 | 11-12681 | ||
V | M10x3 Washer | 2 | 26-15533 | Apply grease to inner surface | |
W | M10x20 bolt | 2 | 16 Nm | 26-27484 | Apply Loctite 242 to threads |
X | 6902-2RS Max Bearing | 2 | 11-12218 | ||
Y | Washer | 2 | 26-27483 | Apply grease to inner surface | |
Z | M10x2.6 Flip Chip | 2 | 26-27482 | Apply grease to outside surface |

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | Rear axle 12x173.7 | 1 | 08-22209 | Apply grease to shaft and threads | |
B | SCB UDH | 1 | 23-23491 | Interchangeable with Sram UDH | |
C | SCB UDH screw | 1 | 26-23492 | Reverse thread | 20 Nm |
D | M10x26 Bolt | 2 | 26-27487 | Apply Loctite 242 to threads only, apply grease to shaft only | 16 Nm |
E | Dust Shield | 4 | 26-27488 | Apply grease to inner surface | |
F | 6802-2RS Bearing | 4 | 11-27485 | ||
G | Bearing spacer | 2 | 26-27489 | Apply grease to shaft | |
H | M10x6 Nut | 2 | 26-27486 | Apply grease to inner surface | |
I | Chanistay protector | 1 | 30-27476 | ||
J | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads | 0.1 Nm |
K | M4x10 FHCS | 2 | 26-22938 | Apply Loctite 242 to threads | 0.65 Nm |
L | OneUp chainguide | 1 | 19-22609 | ||
M | OneUp chainguide back plate | 1 | 26-27839 | ||
N | Cable Loop Guide | 1 | 30-27838 | ||
O | M3x6 | 2 | 26-22358 | Apply Loctite 242 to threads | 0.6 Nm |
P | M5x12 HHS | 1 | 26-22570 | Apply Loctite 242 to threads | 2 Nm |
Q | Seatstay Protector | 1 | 30-21453 |

label | name | quantity | part_number | torque | blurb |
---|---|---|---|---|---|
A | Battery mount rear PT600 | 1 | 26-27493 | ||
B | M4x10 SHCS | 8 | 26-28053 | 1.2 Nm | Apply Loctite 242 to threads |
C | Bosch H-Connector | 1 | 26-27870 | ||
D | Bosch battery PT600 | 1 | 78-25241 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | |
E | Battery mount front PT600 | 1 | 26-27494 |

label | name | quantity | part_number | blurb |
---|---|---|---|---|
A | Bearing Dust Shield | 4 | 26-11612 | Apply grease to inner surface |
B | 6902-2RS Max Bearing | 4 | 11-12218 | |
C | 15x48 Bearing spacer | 1 | 26-17707 | |
D | 15x40.25 Bearing Spacer | 1 | 26-17013 | |
E | Cable loop FT NDS | 1 | 26-25329 | |
F | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads |

Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
---|---|---|---|---|---|---|
S | High | A | 7 | 116 | 116 | 118 |
M | High | B | 7 | 116 | 118 | 120 |
L | High | A | 7 | 118 | 120 | 120 |
XL | High | A | 7 | 118 | 120 | 120 |
XXL | High | A | 7 | 118 | 120 | 120 |
S | Low | A | 7 | 116 | 118 | 118 |
M | Low | A | 7 | 116 | 118 | 118 |
L | Low | A | 7 | 118 | 120 | 120 |
XL | Low | A | 7 | 118 | 120 | 120 |
XXL | Low | A | 7 | 118 | 120 | 120 |
Allez plus loin
Sizing and support for the Bullit.

Géométries et tailles

Configurationet support technique
Also Consider...

LOOKING FOR SOMETHING A LITTLE LIGHTER?
See the Heckler SL